8
Step 2
Slip the connector hose through the two pieces of the heater post, as shown. The
connector will be factory assembled to the top heater post piece. Slide all three pieces
together and secure with the screws provide, as illustrated below. Make sure the holes
for the screws line up when sliding the pieces together.
DAYVA PREMIERE OUTDOOR HEATER
Step 3
Place the cabinet on the base so that the three threaded studs pass through the mounting
holes in the cabinet. Once the cabinet is in position over the studs, place a 1/4” nut on
each stud and tighten securely with a wrench.
BOTTOM
SCREW &
LOCK WASHER X 4
CONTROLS
TOP
GAS HOSE AND REGULATOR PROTRUDES FROM THIS END
