(5)
Back panel and input/output (I/O) definition
1. Power Mode:
Select the either energy-saving or “always-on” power mode
o
Auto:
Amp goes into standby after no detected signal input for 20 minutes*
o
On:
Amp is always on, regardless of input signal status.
* Amp will automatically turn on typically in one second or less once audio signals are resumed.
2. Analog input attenuation:
Affects analog balanced and unbalanced inputs only.
o
Normal:
No attenuation.
o
Hi:
Attenuates input signal by -6dB.
3. USB Control:
Used for PC-GUI communication with custom PC software included with your amp.
Please refer to
PC-GUI user guide
on
Page 8
.
USB also allows for
firmware update by
Dayton Audio
release. See
Page 16
for more on the system “flash” update process.
4. Feature Control:
Single knob digital actuator with single/double-click enabled with rotary scrolling to
navigate the amp’s extensive feature menu.
5. Limiter LED:
Lit when Limiter is active (Red).
6. Standby/On LED:
o Red when amp is in energy saving “stand by” state.
o Green when amp is operating normally.
