background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 58986 

        

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to potential 

personal injury hazards.  Obey all safety messages that 

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Failure to heed these markings may result in personal injury and/or property damage:

1.  Study, understand, and follow all instructions 

before operating the device.

2.  Do not exceed rated capacity.

3.  Use only on a hard, level surface 

capable of supporting the load.

4.  Activate the wheel- and/or caster-locking 

devices after moving a vehicle.

5.  Never work on, around, or under a vehicle 

supported by vehicle-moving dollies.

6.  Use of this product is limited to transporting only.

7.  No alterations shall be made to this product.

8.  Before moving a load, assure that the load is 

centered and secured with the saddles clamped on 

the vehicle pinch welds. Confirm that the saddles 

are fully engaged on the vehicle pinch welds and all 

swivel caster wheels are contacting the ground.

9.  Wear ANSI-approved safety goggles and 

heavy-duty work gloves during use.

10. Keep clear of load’s path while placing on and 

removing from dollies, and while moving.

11.  Use as intended only.  Do not use for 

aircraft purposes.  

Use only in pairs.

12. Inspect before every use; do not use 

if parts are loose or damaged.

13. Be aware of dynamic loading!  Sudden 

load movement may briefly create excess 

load causing product failure.

14. Assemble only according to these instructions.  

Improper assembly can create hazards.

15. Keep your work area clean and well lit.  

Cluttered work areas invite accidents.

16. Keep bystanders, children, and visitors 

away while operating Dolly.  Distractions 

can cause you to lose control.

17. Stay alert.  Watch what you are doing, and use 

common sense when operating Dollies.  Do not use 

while tired or under the influence of drugs, alcohol, or 

medication.  A moment of inattention while operating 

Dollies may result in serious personal injury.

18. Before use, read manufacturer’s instruction 

manual for the vehicle you will lift.

19. Keep clear of load while lifting and lowering.

20. Lower load slowly.

21. Weight capacity and other product capabilities apply 

to properly and completely assembled product only.

22. Store idle Dollies out of reach of children 

and other untrained persons.  Jacks are 

dangerous in the hands of untrained users.

23. Dolly service must be performed only by 

qualified repair personnel.  Service or 

maintenance performed by unqualified 

personnel could result in a risk of injury. 

24. Industrial applications must follow 

OSHA requirements.

25. Do not allow anyone in the vehicle while 

using the Dolly.  Do not start the vehicle 

while it is on Dollies.  Keep all bystanders 

a safe distance away from the vehicle.

Summary of Contents for DPD-180









Reviews: