DAYTEK PLASMA DISPLAY, User Manual

Page: 42 / 46

4 2
Trouble shooting
Maintenance and Service
Do not use other functions that are mentioned on this user’s manual.
It will be main reason of a faculty and motion error.
In case a problem occurs with your PDP TV, please take the following steps first.
If you still have the problem, turn the power off and contact your dealer or an authorized service center.
●
Screen related Matters
P r o b l e m A c t i o n
The screen does not appear.
Is the power plug pulled out? Insert the power plug. Turn the main
power button on and pre ss the power button of the remote contro ller.
The screen appears too
This problem occurs for a brief time in the process of
slowly after the power is turned on.
image elimination processing in order to hide temporary screen noise
that occurs when the power is turned on. But if the screen does not
co me af te r 1 minu te ha s pa sse d, con ta ct yo u r d ea ler o r an
authorized service center.
Screen is too bright or too dark. Perform brightness adjustment or Contrast adjustment. (Please refer
to page 24)
Screen is too large or too small. Adjust the screen size. (Please refer to page 28)
Stripes appear on the screen
Stop using wireless telephones, hair driers and electric drills.
and it shakes.
Simultaneous Screen
Check that PDP TV and external equipment are c o n n e c t e d .
does not appear.
Check the inputs of simultaneous screen by pressing sub-screen
s e l e c t i o n .
The screen does not move. Press the STILL button. (Please re fer to pag e 21) Check if the Pause
button is pressed on external equ ipment.
Comp uter In put Screen is abnormal. Perform manual fine adjustment (Please refer to page 40).
Automatic Turn On does not work.
Automatic Turn On function works only when turning the PDP TV o ff
with the remote controller or Standby button.
The screen does not appear on Check that S-VIDEO sou rce is connected.
AV source. If AV an d S-VIDEO are simultaneosely connected, you can’t select
AV source.
Problem Action
Screen appears, Voice is not heard 1. Press the "Mute"button. (page 21)
2. Increase the sound by pressing volume adjustment button.
3. Check if voice terminal of external input is connected properly.
4. Check if audio cables are connected properly.
5. If it is on PIP mode, convert audio of main screen and sub-
screen by pressing S.SELECT.
6. Select and check the other input.
If the sound still does not work and the other channels are the
same a fter you have done as the above, contact your dealer or
an authorized service center.
Lots of noise (static) occurs. When connecting a Set-Top-Box, check that it is on stereo
broadcasting. If it is, the TV program may not be available or t h e
recep tion ma y b e b ad. Check the audio source with another player. If
that sou rce is good, con tact yo ur d ealer o r an Authorized service cen ter.
●
Sound related Matters