1.
Mark and drill two holes in the wall at the
desired installation height.
If installing to a
masonry wall and using the supplied wall plugs,
drill 8mm holes and tap the plugs into place
(A)
.
2.
Fix the detachable bracket from the
retractable line case (D) at the desired
height, by using the two screws (B).
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
Installation location
The maximum extension of the clothesline is 3.5m.
The chosen installation location must have a
wall-to-wall spacing no larger than 3.5m.
For
timber wall/ stud installation
, follow
instructions and use 2mm diameter pilot hole to
drill all mounting positions. Plastic plugs are not
required for this type of installation.
Check for hidden pipes and cables before drilling.
Tools required for installation:
•
Drill
•
Masonry drill bit (8mm diameter)
•
Phillips head screwdriver
1
A
B
D
2
Please check the carton contains all the
required parts before installing the clothesline.
Your carton should contain the following:
A.
Wall plugs
x 4
B.
Screws
x4
C.
Hook with Bracket
x 1
D.
Retractable Line Case with Bracket
x 1
(Fixings included are for installing into masonry or
timber/stud walls only. For fixing to other materials
consult your local hardware specialist)
Note: This product is intended
for Indoor Use Only
A
B
C
D
