4
Installation steps
!Warning: Always work with appropriate personal safety
gear including safety glasses, gloves and hearing protection if
using air powered tools.
Begin by inspecting the components & hardware for dam-
age. Then compare components & hardware to the bill of materi-
als for completeness. If anything is missing/damaged, do not pro-
ceed with the installation. Please, call Daystar Products and we
will send you the missing of damaged components free of charge.
!Caution: Vehicle must be raised to install Body lift kit. Using
a hydraulic chassis lift will greatly ease installation. If anoth-
er jack is used, assure vehicle is level on a firm surface, in
park (1st gear), rear wheels blocked and jack stands in place
to support vehicle in case jack or vehicle shifts.
Installation Note:
This kit will only fit Jeeps with an AUTOMATIC
transmission.
1. The tools needed for installation and a list of parts included in the kit are listed
on page 2. Make sure have all of the proper tools and understand these direc-
tions before proceeding.
2. When working 2009 and up 2dr & 4 door model jeep, you will have 2 extra
mounts and 4 extra stud extenders.
