Days Strider MD 4, Operating Manual

Page: 80 / 94

80
Issued: 24.02.2005
S T R I D E R M D Repairs - lighting
18.5.2 Replacing bulbs in front/rear indicators
Bulb version used: 24 V / 10 Watt
Loosen the fixing screw (1) and remove
the front or rear light lens.
➨
Remove the bulb:
(1.) Press the bulb in lightly and remove
by turning 1/8 turn to the left.
(2.) Pull the bulb out of the lamp holder.
➨
Fitting a new bulb:
(1.) Align the bulb base pins with the
grooves in the lampholder and
push the bulb into the lampholder.
(2.) Press the bulb in lightly and lock
by turning 1/8 turn to the right.
➨
NOTE
The working sequence for front and
rear indicators is the same, and is
described using photographs of the
rear lights.
Removing the lamp lens
(Example: rear light)
Removing the bulb
Fitting a new bulb
Insert the rear or front light lens and
secure with the fixing screws.
➨