Days Strider MD 4, Operating Manual, Page: 26 / 94

26
Issued: 24.02.2005
S T R I D E R M D
The armrest height is adjusted using
four holes in the armrest support (b).
The height can be adjusted in stages
of 10 mm.
Pull the armrests upwards to the required
height until the hole in the armrest
support appears through the hole in the
seat tube (5).
Reinsert the Allen screw and tighten.
➨
➨
Adjusting the
armrest height
Adjusting the seat position
6.3.4 Adjusting the backrest inclination
The backrest inclination can be adjusted in
three locking stages.
1st stage = drive setting
2nd stage = drive setting
3rd stage = not for driving!
Adjusting the backrest
Tipping hazard!
• Only adjust the seat adjustment to the third
position when the vehicle is not travelling!
Pull the locking lever (6) and move the
backrest forwards or backwards to the
required position (7).
Let go of the locking lever and engage
the locking mechanism by pushing the
backrest slightly forwards and
backwards.
➨
➨
Accident hazard if backrest is not
properly engaged!
• Ensure that the backrest is properly engaged
after adjustment by pushing it slightly forwards
and then backwards.