21
Display advanced
To access the advanced settings of your display press and hold the S+ and S- buttons. To
exit this menu press and hold S+ and S- buttons again. To switch between menus quick
press the power button. To change the setting on any P Menu press S+ or S- to go up or
down respectively.
P01
: Back light Display Brightness - level 1 is the darkest and level 3 is the brightest.
P02
: Mileage unit - Switch between KM and miles.
P03
: Voltage - Set the voltage of the bike [this should be set to the number specified in the
specification section].
P04
: Sleep time - this specifies how long before the bike automatically turns off [0 will not
turn off, 1 - 60 how long before it will turn off in minutes].
P05
: Pedal Assist Setting - Specifies how many levels of Pedal Assist there is :
0 = 1 - 3 Levels / 1 = 1 - 5 Levels
P06
: Wheel Diameter - This is to set the wheel diameter of the bike to ensure correct
speed and distance travelled accuracy.
P07
: Magnetic Steel Velocity - (Not applicable with this unit)
P08
: Speed Limit: Sets the maximum speed the unit can travel. (This must be set to your
municipal laws)
P09
: Throttle on Zero: This determines if the throttle will work on 0 Pedal Assist Setting.
0 = Throttle works on No PAS / 1 = Throttle only works on Level 1 PAS and above.
Summary of Contents for Tofino X
Page 1: ...tofino X User Manual...
Page 31: ...31...
