11
Maximum Load
Do not exceed the maximum load capabilities of your e-ATV. You can find the exact load-
ing capacity listed in the technical specifications in this guide.
If you exceed the maximum load, the performance of the ATV will suffer.
Exceeding the maximum load of your e-ATV could cause damage to the shocks, to the
mechanism and, ultimately, even to the frame. It could also cause your motor to work too
aggressively, and it may burn out.
Disconnecting the Circuit Breaker
When the circuit breaker is disconnected, all power from the battery to the e-ATV is
blocked. This is useful if you are going to store your e-ATV or if it is damaged and you wish
to bring it to be serviced.
Disable the circuit breaker using the following very simple procedure.
1.
Open the seat compartment.
2.
Find the circuit breaker switch (it should be very obvious).
3.
Activate the switch. The power to the e-ATV will be disabled.
Long-Term Storage of your E-ATV
If you are storing your ATV for a long period, disconnect the circuit breaker. This is a safer
way to store the electric ATV, as it prevents accidental activation of the e-ATV and makes it
impossible to activate it even with the key. The circuit breaker is found by opening up the
battery case. It sits between the battery and the controller.
Please see the section titled “Your Battery” for instructions on battery maintenance while
your e-ATV is being stored.
*Your e-ATV may or may not have a circuit breaker.
