20
Brakes
On either handle bar you will find a brake lever as
picutred on the right. Pull this lever towards the
unit to engage them.
The left brake lever engages the rear brakes and
should always be used first.
The right brake lever engages the front brakes and
should be only use in conjunction with the rear
brakes when needing to make an abrupt stop.
Note: Pressing the brakes will disengage the
motor and must be released before the motor
will engage again.
Engaging the Brake Lock
The Boomerbeast has a brake lock that will prevent it from rolling even when parking the unit
on a hill. To engage the brake lock do the following:
1) Pull the brake lever on the left hand side towards you as much as you can.
2) Take the latch with your other hand or other finger and pull it into the grooves of the brake
lever.
3) Release brake lever and make sure the brakes are stuck in a pressed position.
To disengage the brake lock, just pull the brake lever towards you slightly more and the brake lock
latch will pop out. Release the brake lever and you are ready to go!
Summary of Contents for Boomerbeast 2D
Page 1: ...Boomerbeast 2d User Manual...
