19
Right handle bar
1. Front Brake - Pull this lever to engage the front
brake.(Use the rear brake first located on the left
handle bar.)
2. Throttle - Slowly rotate this towards you to engage
the motor.
3. Motor Switch - Put this switch to the left engage
just the rear motor or to the right to engage both front
and rear motors.
4. Lights - Push this to the right most position to turn
on all lights. Push this to the middle position to have
just the rear lights on. Push this to turn off all the lights.
5. 3 Speed Switch - Choose between 1 of 3 speeds.
Position 1 will get you the furthest range at the slowest
speed. Position 3 will get you there fastest with the
shortest range.
Left handle bar
1. High Beam / Low Beam - Toggle this switch
to choose between a low or high angle of the
headlights. (The headlight must be on for this
to have an effect)
2. Turn Signals - Push this to the left to
indicate turning to the left and into the middle
once your done. Push this to the right if you
are turning to the right.
3. Reverse switch - Press and hold this while
engaging the throttle to go in reverse.
4. Horn - Press this to honk the horn
*PLEASE NOTE* Always be aware of your surroundings when
operating this in reverse and use it at your own discretion
*PLEASE NOTE* Always be sitting on the unit before
turning the throttle.
Summary of Contents for Boomerbeast 2D
Page 1: ...Boomerbeast 2d User Manual...
