15
Charging the Boomerbeast 2D
The Boomerbeast 2D comes with a lead acid battery pack that can be charged together
or individually. These can be done both in and out of the Mobility Scooter. To charge the
Boomerbeast 2D directly in the unit look for the charge port underneath the seat. It will
be covered with a flap that you must lift up and then plug the female end into that port.
Once the Mobility Scooter is charging the charger will glow red. When the unit is fully
charged the charger will glow green and then your Mobility Scooter is ready to go.
Warning
Do not leave the Boomerbeast 2D charging for long periods of time after it is fully charged.
Do not leave the Boomerbeast 2D charging for long periods of time after it is fully charged.
Once the Mobility Scooter is charged unplug it ASAP.
Once the Mobility Scooter is charged unplug it ASAP. Failure to do so can reduce the battery
Failure to do so can reduce the battery
life and can cause possibly become a fire hazard
life and can cause possibly become a fire hazard
Accessing your Circuit Breaker
To prevent surges, we have installed a circuit breaker.
If you are unable to get power to your Mobility
Scooter more than likely your circuit breaker has
been triggered and needs to be switched to the on
position.
To do this:
Unlock the seat, and lift up the chair. (See next page
for more info)
Summary of Contents for Boomerbeast 2D
Page 1: ...Boomerbeast 2d User Manual...
