17
Description
Cause
Solution
Reset counter down timer
During the advance
t i m e r c o u n t d o w n
sequence ,the sauna
room door is opened,
the timing stopped and
will not restart again until
it is reset.
Door LED is
on
To heat press the Model button to change
to A model (heating Mode)
Sauna heater is in timer
mode
Wait LED is on
red
1. – L
℃
means temperature sensor hasn’t
connected or the temperature is lower
than 0
℃
, check the connection, cable
or change sensor
2. – H
℃
means there is a short circuit in
t h e t e m p e r a t u r e s e n s o r o r t h e
temperature is higher than 115
℃
(check the connection, cable or change
sensor
3. Change controller
1.Temp sensor isn’t
connected or cable is
broken
2. The temperature is
lower than 0
℃
or
higher than 115
℃
Temperature
w i n d o w s
display --L
℃
or --H
℃
7. MAINTENANCE
It is recommended that the sauna heater is inspected on a regular basis for any signs of
deterioration of its condition. Pay particular attention to both the fastenings, the condition
of the wiring and the electrical elements. It’s recommended that commercial operators
change the sauna stones at least once very 12 months.
If the stones have started to crumble this can cause the
elements to overheat and they should be changed for new
rocks.
NOTE
