12
4.5 Heater Guard (not supplied)
Ÿ
The heater should be guarded against accidental contact with a wooden guard similar
to the one shown below – according to the position of the heater within the cabin it may
need to be guarded on 2 or 3 sides.
Ÿ
Fix the guard in place around the heater by drilling and screwing accordingly.
It is important that the top rail of the guard is set at least 30 mm
below the rim of the heater such that it does not receive heat
radiation directly from the heater rocks.
NOTE
4.6 Sauna Stones
Ÿ
Do not use the heater without sauna stones, otherwise it may cause a fire. These can be
supplied from any Dayliff dealer.
Ÿ
Do not use ordinary stones which may emit harmful substances, easily break and do not
possess good heating capacity.
Ÿ
Wash the stones to clear the dust before putting them into the heater.
Ÿ
Allowable size of stones is about 3-8cm.
Fig 12
Fig 13
