10
Sensor
OC-SB Controller
(Voltage=DC 5V)
Sauna Heater
POWER
AC 400V 3N~
OCS-B Control Box
Controller
Master
Slave 1
Slave 2
To next
slave
Multi Sauna Heater Linking Function
4.3 Installation for Controller
The control panel should be installed at a height of approximately 1200mm for ease of use.
Installation method.
•
Drill a 40mm hole on wall for the wires.
•
The panel can be monitored by either drilling two holes 118mm apart for the screws.
•
Alternatively remove the plastic cover using a flat screw driver to carefully lever it off, then
use the holes to mark desired drill holes
Fig 8
Fig 9
Commercial Heater
Control box output to sauna heater can not be bridged
WARNING
