DAYCO D206DC, Operator'S Manual

Page: 9 / 24

9 Page
D206DC HOSE CRIMPING
„ „ „ „ „
Slide the Pusher into position on the hydraulic ram
„ „ „ „ „
Recheck the fitting for correct alignment and depress the
pneumatic Start/Stop switch bulb. Keep it depressed until the crimper
shuts off automatically.
„ „
„ „ „
Measure the finished fitting diameter to be certain that it is
within the crimp specification tolerances.
„ „ „ „ „
If multiple fittings are being crimped set the coupling stop to
automatically position the fitting and set the retraction stop to limit
the ram retraction to the position where the hose and fitting can just
be easily removed.
„ „ „ „ „
Check the diameter of the finished crimp to be certain that it is
within the hose and fitting manufacturer’s specifications.