7
GB
Troubleshooting
Fault
Possible cause
Solution
Ignition fault.
1. The gas supply is closed.
2. Insuffi cient gas pressure.
3. Weak spark.
1. Open the gas supply
2. Wait until the gas supply
is normal again.
3. Check the distance
between the electrode
and the thermocouple
(should be
approximately 4-5 mm).
The � ame goes out when the
control button is released.
1. The thermocouple is not
functioning correctly.
2. The ignition unit is loose.
1. Press and hold the
control button for 10
seconds and turn the gas
heater on.
2. Tighten the ignition unit.
Salmon-coloured � ame.
1. Inadequate
maintenance.
1. Get a professional to
inspect and maintain the
gas heater.
Abnormal combustion.
1. Insuffi cient gas pressure.
2. The supply pipes are
blocked.
1. Wait until the gas supply
is normal again.
2. Clean the supply pipes.