6
Switching the gas heater off
Turn the power selector to position
.
Fully close the valve on the gas bottle.
Changing gas bottles
Ensure the gas heater is switched off and the
gas regulator closed before changing bottles.
Change the gas bottle as described in the
regulator user guide.
Check for leaks (see ‘Leak test’).
Cleaning
Clean with a soft, damp cloth.
Never use corrosive or in� ammable cleaning
agents.
Built-in safety functions
Anti-topple function:
Automatically turns the gas supply off if the
gas heater overturns.
Oxygen check function:
Automatically turns the gas supply off if the
oxygen content in the air falls below a certain
level.
Maintenance
1. Check the � exible hose between the
regulator and the gas heater and replace
if damaged, worn or destroyed.
2. It is recommended that the gas heater be
serviced annually by a quali� ed person
in accordance with the Danish Gas Safety
Act 2018 (installation and use).
3. If parts need to be replaced, they must be
replaced with the correct original spare
parts from the manufacturer.
4. If the gas heater has not been used for a
prolonged period, the user must check
that it functions normally, e.g. that the
� exible hose and regulator are not too
old, that there are no leaks from the gas
connection from the gas bottle to the
gas heater, that the gas heater can be lit
without � ashback and that the gas heater
is not making any unusual noise.
Storage
1. Disconnect the gas bottle and remove it
from the heater
2. Store gas bottles in a well-ventilated
area away from in� ammable materials.
Gas bottles should preferably be stored
outdoors. Gas bottles must not be stored
in cellars or high-rise buildings.
3. The gas heater must be covered in a
dry, dust-free environment in its original
packaging.