background image

SAFETY RULES AND RECOMMENDATIONS FOR THE INSTALLER 

1

D

uring  the installation of the indoor and outd-

oor units the access to the working area should 
be forbidden to children.
Unforeseeable accidents could happen.

M

ake sure that  the base of  the outdoor unit  is

firmly fixed.

C

heck that air  cannot enter the refrigerant sys- 

tem and check for  refrigerant leaks when  mo-
ving the air con ditioner. 

C

arry out a test cycle after installing the air co-

nditioner and record the operating data. 

T

he ratings of the fuse installed in the built  in- 

control unit are  T 5A /  250V    . 

T

he user must  protect  the  indoor unit  with a 

fuse of  suitable capacity for the maximum  in-
put current or with another overload protection
device. 

E

nsure that  the mains voltage corresponds  to 

that stamped on the rating plate . Keep the sw-
itch or power plug clean. Insert the power plug 
correctly and firmly into the socket, thereby a- 
voiding the risk of electric shock or fire due to 
insufficient contact. 

C

heck that the socket  is suitable for the plug , 

otherwise have the socket changed. 

D

o not install the appliance at  a  distance  of 

less than 50 cm from inflammable substances 
(alcohol, etc.) Or from pressurised containers 
(e.g. spray cans). 

I

f  the appliance  is used  in areas without the 

possibility of ventilation, precautions must be 
taken to prevent any leaks  of refrigerant  gas
from remaining in the environment and creat-
ing a danger of fire 

T

he packaging materials  are  recyclable  and 

should  be  disposed  of  in the separate waste 
bins .Take the air conditioner at the end of  its 
useful life to a special  waste collection centre 
for disposal. 

O

nly use the air conditioner  as  instructed  in 

this booklet . These instructions are not inten-
ded  to cover  every  possible  condition  and 
situation . As  with  any electrical  household 
appliance ,  common  sense  and  caution  are 
therefore  always  recommended for installat-
ion, operation and maintenance. 

T

he appliance must be installed in accordance

with applicable national regulations. 

B

efore accessing the terminals , all the  power 

circuits must be disconnected from the  power 
supply. 

R

ead this guide before installing and using  the

appliance.

T

he appliance must be fitted with means for 

disconnection from the supply mains having 
a contact separation in all poles that provide 
full disconnection under overvoltage 
category III conditions, and these means 
must be incorporated in the fixed wiring in 
accordance with the wiring rules. 

T

he appliance shall be installed in accord-

ance with national wiring regulations.

T

his appliance can be used by children a-

ged  from  8  years and above and persons 
with reduced physical, sensory or mental 
capabilities or lack of experience and kn-
owledge if they have been given supervis-
ion or instruction concerning use of the a-
ppliance in a safe way and understand the 
hazards involved. Children shall not play 
with the appliance. Cleaning and user ma-
intenance  shall  not  be made  by children 
without supervision.

T

he air conditioner must be installed by 

professional or qualified persons.

Summary of Contents for GLAMOUR INVERTER 45 FS

































Reviews: