background image

1

2

Cautions

Before using

Do not install the washing machine in the bathroom or any
other damp places. Do not wash the machine with water and do not
put wet clothes on the control panel film.

Do not use water hotter than 50 C.

If the machine is placed on a carpeted floor, please adjust 
the feet in order to allow air to circulate freely.

Do not wash raincoat, bike cover, feather dress and such
waterproof laundry as it will cause unusual vibrations during
spinning.

Do not share the same socket with other electric appliances. 
Do not use a damaged plug or a loose socket.

Please insert the plug into the power socket with voltage rating
220V A/C.

Always unplug the appliance and turn off the water when
the power is cut, the machine is moving, getting cleaned,
or it is not in use. Do not insert or pull off the plug with wet hands.

Do not bend, stretch, twist, strap, change, press or nip the electric cable.  If the electric cable or plug is damaged or the socket
becomes loose, they must be repaired or changed by our appointed repair stations or the professionals of our post-sale service
department to avoid danger. The pin of the plug must remain clean. Please clean it carefully with dry cloth, if it is dirty.

Ventilation holes
at the bottom

Soft item

Before using

Parts name

Before using

Symbol definition

Warning symbols

Pay special attention to the warning symbols. There may be

 

serious risks to personal body safety or damages to the washing
machine, if not followed.

Please stop doing the contents with this symbol, otherwise
it will damage the appliance or injure your body.

Forbidden symbols

Accessories  

The end connecting to 

the appliance

Connector for

water inlet hose 

and tap

The end connecting to 

water inlet hose connector

Bottom cover

       (1pc)

Water inlet hose (1 pc)

Water inlet hose connector (1 pc)

Drainpipe (1pc)
Drainpipe clip (1pc)

Top lid

Top frame

Lint filter

Pulsator
Body
Base

Power cord

Fixing foot (3pcs)

Back cover

Adjustable foot

Foot wheel (2pcs)

Feed valve

Water box lid

Detergent

box
Softener 

feed in
Inner tub

Control panel 

(glass lid front)

Drainpipe connector

Summary of Contents for DWT 1166 X ADS+












Reviews: