40
Dishwasher / User’s Manual
/44 EN
7
Troubleshooting
Machine does not start.
•
Power cable is unplugged. >>> Check if the power cable is plugged in.
•
Fuse is blown. >>> Check the fuses in your house.
•
Water is cut. >>> Make sure that the water inlet tap is open.
•
Door of the machine is open. >>> Make sure that you have closed the door of the
machine.
•
On / Off button is not pressed. >>> Make sure that you have turned on the machine by
pressing the On / Off button.
Dishes are not washed clean
•
Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
•
Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
•
Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper
impellers by hand to make sure that they rotate freely.
•
Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with
food remnants such as lemon pips. Clean the impellers regularly as illustrated in section
“Cleaning and Care”.
•
Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
•
Filters are installed incorrectly. >>> Check the filter system and make sure that it is
installed correctly.
•
Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
•
Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet detergents.
•
Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount
of detergent according to the soiling degree of your dishes and/or programme
definitions. We recommend you to use tablet detergents for optimum results.
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
•
Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is
closed tightly after adding detergent.
Dishes are not dry at the end of cycle
•
Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no
water will accumulate in them.
