Dishwasher / User’s Manual
13 / 44 EN
Preparation
Unpack the test
strip.
Open the tap and
let the water flow for
approx. 1 minute.
Dip in the test strip
into the water for 1
second.
Take out the strip
from the water and
shake it.
Wait for 1 minute.
Make the necessary
adjustment
according to the test
strip.
After detecting the water hardness:
1. After switching on your machine, press and hold the Menu key for 3 seconds.
C
Some models require pressing
Menu key once to enter settings
menu.
2. Using <- and +> keys, proceed until the water hardness setting indicator becomes on (“r”
position will be displayed).
3. Using the Selection key, adjust water hardness level according to the hardness of the
supply water. For correct setting please see "Water hardness level setting table".
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French* Water
Hardness °dF
Water Hardness Level Indicator
Level 0
0-5
0-4
0-8
Press the Selection key to switch the water hardness level
to position 1. (r1)
Level 1
6-9
5-7
9-13
Level 2
10-15
8-12
14-22
Press the Selection key to switch the water hardness level
to position 2. (r2)
Level 3
16-19
13-15
23-27
Press the Selection key to switch the water hardness level
to position 3. (r3)
Level 4
20-24
16-19
28-34
Press the Selection key to switch the water hardness level
to position 4. (r4)
Level 5
25-62
20-50
35-90
Press the Selection key to switch the water hardness level
to position 5. (r5)
Perform the same hardness level adjustment that you have set on the control panel also
with the regeneration adjustment switch. For example, if you have adjusted to “3” in the
control panel, also set the regeneration adjustment switch to 3.
Regeneration Adjustment Switch
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
1
1
2
3
4
5
