16
Troubleshooting Guide
When viewing data, dashes appear in place of a value for functions other than wind
direction. Why?
If no data was recorded by a sensor (for example, the sensor was disconnected
or radio interference blocked reception) or if bad data was recorded for a
sensor (for example, the sensor was malfunctioning), the software dashes out
the entry rather than showing invalid data. You can use the record editor to
correct these entries.
The data I want to see, such as humidity (Monitor) is missing completely or is
grayed-out. Why?
All optional sensors must be enabled in the
Station Configuration Setup
dialog box before the data will be displayed in WeatherLink. If you are not
seeing data from a sensor that is installed in your weather station, be sure
check the
Station Configuration
in the
Setup
Menu and make sure the sensor
has been selected.
Summary of Contents for WeatherLink for Windows 7862
Page 1: ......
