background image

Setup Mode

12

Screen 4: Time & Date

The very first time you power-up the console, the time and date are set to 

12:00AM January 1

st

, 2004. Be sure to enter the correct date and local time. 

Screen 4: Time & Date

To change the time and date:

1. Press the right and left arrows to select the hour, minute, month, day or year. 

The selected time or date setting blinks on and off.

2. To change a setting, press the up and down arrows to adjust the value up or 

down.

To choose a 12-hour or 24-hour clock, first select either the hour or minute 
setting, then press 2ND and immediately press UNITS

This toggles the 

clock setting between the two clock types.

To choose between a MM/DD or DD.MM display for the date, first select 
either the day or month setting, then press 2ND and immediately press 
UNITS

This switches the console from one date display to the other.

3. Press DONE to move to the next screen.

Screen 5: Latitude

The console uses latitude along with longitude to determine your location, 
allowing it to adjust the forecast and calculate the times for sunset and sunrise.

Screen 5: Latitude

• Latitude measures distance north or south of the equator. 

• Latitude is used with longitude to identify your position on earth. 

am

Summary of Contents for Vantage Pro2 Updater

























































Reviews: