Installation Outline
Page 11
Procedure 11. Mount the ISS and SIM Housing
Refer to the following illustrations and refer to this section in your ISS Installa-
tion Manual to mount the ISS and the new SIM Housing. If you removed the ISS
from it’s mounted position to install the Fan-Aspirated ISS Retrofit Kit, you can
now re-mount it.
1.
To prevent erroneous
rain counts by your rain
collector, put the console
into Setup Mode before
mounting it. Enter Setup
Mode by pressing and
holding the DONE key
while you press the “-
”(down arrow) key.
2.
Install the ISS in it’s
former location.
3.
Install the SIM housing
adjacent to the ISS as
shown in the illustra-
tions.
4.
When you have finished
mounting the ISS, exit
Setup Mode on the con-
sole by pressing and
holding the DONE key.
5.
Return the old transmit-
ter board to Davis Instru-
ments in the new board’s
shipping box. Use the
included return ship-
ping label.
6.
(Wireless Models only)
Please be sure the battery
has been removed from
the old board before
shipping it.
1/4" Flat Washers
1/4" Lock Washers
1/4" x 1-1/2" Lag Screws
1/4" Flat W
asher
1/4" Lock W
asher
1/4" Hex Nut
U-Bolts
ISS2 SPARS RetroKit D011.fm Page 11 Wednesday, April 23, 2003 11:26 AM
Summary of Contents for Vantage Pro ISS Retrofit Kit
Page 23: ...Troubleshooting Page 23...