DAVIS IC6312AU Manual Download

Page: 51 / 56

Console Data Display Specifications

Console Data Display Specifications

Historical Data . . . . . . . . . . . . . . . . . . . . . Includes the past 24 values listed un-

less otherwise noted; all can be
cleared and all totals reset.

Daily Data . . . . . . . . . . . . . . . . . . . . . . . . . Includes the earliest time of occur-

rence of highs and lows; period be-
gins/ends at 12:00 am.

Monthly Data . . . . . . . . . . . . . . . . . . . . . . Period begins/ends at 12:00 am on

the first of every month.

Yearly Data. . . . . . . . . . . . . . . . . . . . . . . . Period begins/ends at 12:00 am on

January 1

unless otherwise noted.

Current Graph Data . . . . . . . . . . . . . . . . . Current data appears in the right

most column in the console graph
and represents the latest value within
the last period of the graph; totals
can be set or reset.

Graph Time Interval . . . . . . . . . . . . . . . . . 1 min., 10 min., 15 min., 1 hour, 1

day, 1 month, 1 year (user-select-
able, availability depends upon vari-
able selected).

Graph Time Span . . . . . . . . . . . . . . . . . . . 24 Int Current Interval (see

Graph Intervals to determine time
span).

Graph Variable Span (Vertical Scale) . . . . Automatic (varies depending upon

data range); maximum and minimum
value in range appear in ticker.

Alarm Indication . . . . . . . . . . . . . . . . . . . . Alarms sound for 2 minutes (time

alarm is 1 minute) if operating on
battery power. Alarm message
displays in ticker as long as threshold
is met or exceeded. Alarms can be
silenced, but not cleared, by
pressing DONE.

Transmission Interval . . . . . . . . . . . . . . . . Varies with transmitter ID code -

from 2.25 seconds (ID1 = shortest) to
3 seconds (ID8 = longest).

Update Interval . . . . . . . . . . . . . . . . . . . . . Varies with sensor - see individual

sensor specs.

Forecast:

Variables Used . . . . . . . . . . . . . . . . . Barometric reading & trend, wind

speed & direction, rainfall, tempera-
ture, humidity, latitude & longitude,
time of year.

Update Interval . . . . . . . . . . . . . . . . . 1 hour
Display Format . . . . . . . . . . . . . . . . . Icons on top center of display; de-

tailed message in ticker at bottom.

Variables Predicted . . . . . . . . . . . . . . Sky condition, precipitation, temper-

ature changes, wind direction and
speed changes.

Summary of Contents for IC6312AU

























































Search results

Summary of Contents for IC6312AU

Reviews:

Related manuals for IC6312AU

Brands by name

Popular brands

DAVIS IC6312AU, Manual

Search results

Summary of Contents for IC6312AU

Reviews:

Related manuals for IC6312AU

Brands by name

Popular brands