16
CT Series Traction Control
www.moretraction.com
Manual In (
On/Off
,
default=Off
) On units where pin 6
(Green) is not used for trigger input, the input can be
used to manually control a timing retard with a push
button. Applying battery positive voltage to pin 6
(GPI1) will trigger a retard, set by the Manual Retard
setting. When the button is released, the timing will
ramp back in at the Ramp In rate.
Manual Retard (
0-20,
default 0
) Sets the amount of
retard that will be removed from the ignition timing
when the Manual In button is pressed.
Max SD (
0-4,
default 0
) Max SD is the maximum
amount of cylinders that will be dropped when
SmartDrop® is active. SmartDrop® will drop
cylinders in a smooth pattern and not drop the same
cylinder until all other cylinders have been dropped.
Dropping cylinders is only used in severe tire spin
situations,
Summary of Contents for CT Series
