DAVIS 6152 User Manual Download Page 8

Page: 8 / 60

Vantage Pro2 Options

Wireless Sensor Transmitter (#6332)

Allows you to add on Davis sensors separately from the sensor suite.

AC-Powered Transmitter Kit (#6331)

Great for mounting a sensor such as the Temperature/Humidity sensor, indoors.

Wireless Leaf & Soil Moisture/Temperature Station (#6345)

Measures and transmits leaf wetness, soil moisture and temperature data. Also for
use with GLOBE.

Note:

Optional wireless transmitters can only be used with Wireless Vantage Pro2 Stations.

Optional Accessories

USB Power Cord (#6627)

Power your console with this 6.5’ USB cord.

Mounting Tripod (#7716)

Simplify installation on the ground, roof, or uneven surface with a galvanized
metal tripod.

Daytime Fan-Aspirated Radiation Shield (#7747)

Add the benefits of fan aspiration to your wireless or cabled system by adding this

radiation shield.

Wireless Repeaters (#7627, #7654)

Extend the range of transmission between your sensor suite and the console with
repeaters and long-range repeaters.

Solar Power Kit (#6614) or Heavy Duty Solar Power Kit (#6612) &
Universal Shelter (#6618)

Mount your console outside inside a weather-resistant shelter with solar power.
Use 6614 for wireless consoles, 6612 & 6618 for cabled consoles.

Wireless Weather Envoy (#6316)

Use an Envoy to interface your wireless station to a computer, freeing the display
for use elsewhere.

Sensor Mounting Shelf (#6673)

Required for mounting the optional Solar Radiation and/or UV sensors.

Additional Vantage Pro2 (#6312) or Vantage Vue Console (#6351)

Enjoy weather information in several rooms.

Extension Cables (#7876)

Allows you to place the Cabled Vantage Pro2 ISS further away from the console

using the extension cable provided by Davis Instruments. Maximum cable length
is 1000’ (300 m). Avail able in 40’ (12m), 100’ (30 m) or 200’ (61m).

Summary of Contents for 6152





























































Search results

Summary of Contents for 6152

Reviews:

DAVIS 6152, User Manual, Page: 8 / 60

Search results

Summary of Contents for 6152

Reviews: