manualshive.com logo in svg

DAVIS 6152, User Manual, Page: 7 / 60

Share
Download
DAVIS 6152 User Manual Download Page 7

Vantage Pro2 Options

3

Vantage Pro2 Options

Available from your dealer or ordered directly from Davis Instruments. Learn 

more about these options at www.davisinstruments.com.

Data Collection Options

The Vantage Pro2 console offers extensive data information, including forecasts, 
historical graphing, moon phase, and much more. However, if you also want to 
access your data on the web on our WeatherLink Cloud platform, you can add 
these data collection options.

WeatherLink Live (#6100)

Wirelessly receives data from sensor suite and add-on sensor transmitters, and 
pushes the data to the WeatherLink Cloud, where you can view and access your 
data on any connected device or smart phone.

WeatherLink

®

 Data Loggers (#6510USB, 6510SER) 

The WeatherLink data logger connects your Vantage Pro2 console directly to your 
computer, providing enhanced weather monitoring capabilities, and a continuous 
preserved data record. View the data on the WeatherLink Cloud with any con-
nected device or smart phone, or on your computer with free WeatherLink Com-
puter Software.

WeatherLink Computer Software

Free to download from WeatherLink.com.

Vantage Connect (#6621, 6622)

Transmits data from remote ISS to WeatherLink.com via cellular connection.

WeatherLink and Mobilize mobile apps 

Free apps let you access your weather, as well as current weather from other 
weather stations, from an connected device

Optional Sensors & Transmitting Stations

Vantage Pro2 stations are extremely flexible. Use the following optional sensors 
and wireless transmitters to enhance the weather monitoring capabilities of your 
Vantage Pro2. 

Solar Radiation Sensor (#6450)

Included with Vantage Pro2 Plus models, and with GroWeather models.
Measures solar radiation. Required for calculating evapotranspiration (ET). Avail-
able for cabled and wireless stations. Requires Sensor Mounting Shelf (#6673).

Ultraviolet (UV) Radiation Sensor (#6490)

Included with Vantage Pro2 Plus models. Required for calculating the UV dose. 

Available for cabled and wireless stations. Requires Sensor Mounting Shelf 

(#6673).

Summary of Contents for 6152





























































Reviews:

No comments