7
CarChip GPS/Wireless Wiring Diagrams
Installing the GPS/Wireless System
See the installation diagram below for correct placement and installation of all
the components in the GPS/Wireless System into a vehicle:
Note: If using a DriveRight 600 with the # 8157 GPS Module, place the # 8157 GPS antenna in
the same location as the # 8128 GPS Module shown in the drawing above.
1. Place the GPS/Wireless Interface Module under the dashboard of the
vehicle, near the DriveRight 600
E
device or SmartCard On-Board Reader
or CarChip Fleet Pro.
2. Secure the GPS/Wireless Interface Module in place using the provided
cable ties, two pieces of velcro tape, or two pieces of double-sided tape.
3. Mount the GPS Module on top of the dashboard.
Cable must enter
unit from the top
GPS Module
# 8128
Situated line-of-sight
to the sky
GPS/Wireless
Interface Module
# 8127 or # 8251
Wireless
On-Board Module
# 8129
