DaVinci Point XXS, User Manual

Page: 36 / 37

AIR TURQUOISE SA | Rte du Pré-au-Comte 8 | CH-1844 Villeneuve | +41 (0)21 965 65 65
Test laboratory for paragliders, paraglider harnesses and paraglider reserve parachutes
Line and Riser Measurements of flight test Paraglider
(1)
Report No. : Sample name: Date measure:
Place:
Manufacturer: S/N: Responsible:
Linked:
Total line length including risers [mm] Main brake line with diff color than A,B,C main line? Yes
+strap
Manu
(2)
Sample Diff Manu Sample Diff Manu Sample Diff Manu Sample Diff Manu Sample Diff Manu Sample Diff Manu Sample Diff Sample
Center
1 7733 7746 13 7656 7667 11 7717 7713 -5 7796 7791 -5 6927 6930 3 7943 7933 -10
2 7689 7699 10 7602 7608 6 7620 7617 -3 7697 7691 -6 6971 6982 11 7727 7720 -7
3 7753 7762 9 7656 7662 6 7640 7637 -4 7707 7698 -9 7600 7592 -8
4 7703 7707 4 7600 7605 5 7601 7601 -1 7665 7658 -7 7554 7548 -6
5 7700 7705 5 7592 7599 7 7627 7624 -3 7686 7679 -7 7433 7428 -5
6 7680 7686 6 7564 7569 5 7563 7559 -4 7612 7606 -6 7321 7317 -4
7 7667 7673 6 7552 7554 2 7530 7526 -4 7575 7568 -7 7298 7293 -6
8 7643 7651 8 7532 7534 2 7513 7508 -5 7554 7548 -6 7380 7373 -7
9 7616 7624 8 7510 7513 3 7514 7507 -7 7551 7546 -5 7212 7207 -5
10 7575 7578 3 7473 7481 8 7481 7467 -14 7504 7494 -10 7111 7104 -7
11 7517 7521 4 7424 7431 7 7421 7407 -14 7442 7431 -11 Stab line to riser: 6999 6990 -9
12 7372 7375 3 7304 7310 6 7321 7308 -13 7346 7336 -10 B
13 7277 7280 3 7215 7221 6 7258 7244 -14 7277 7265 -13
Wing
14 7047 7045 -2 7058 7068 10
tip
15 Number Cell: 36
16 Weight of the glider [kg]: 5.08
17
18
Tolerance [mm]
(4)
:
±15
Riser measurement - total length (inner edge) [mm]
(3)
Acc system configuration max travel Test Atmosphere AGL
Risers Std Acc Trim Risers Std Acc No. of risers 3 Pressure [hPa] 977
A
536 432 n/a
A
506 402
Tolerance [mm]
5 Humidity [%] 40
A'
536 433 n/a
A'
506 403 Temperature [°C] 21.7
B
528 459 n/a
B
498 429 Carabiner [mm] 30
C
516 516 n/a
C
486 486
Tolerance [mm]
2
D
n/a
D
Plausibility check :
Acc
103 *[mm]
Acc
103 *[mm]
*Travel range (distance [mm] 500
500
Trimmer
n/a [mm]
Trimmer
n/a [mm]
between A and rear riser)
Another trim configuration No
[mm] 10000
10002
If yes (description): Remark:
Instrument validity date
Laser distance meter 07.09.2023 Uncertainty of instrument [mm] 3
Line measurements system 07.09.2023
Villeneuve
ISO 91.20
Stab Brake
PG_1652.2020
Davinci Point L close trimmer
APT-L11030-LBL 06.02.2020
Claude Thurnheer
A B C D E
(3)
Risers, Std=Trim speed, Acc=Accelerated, AND if trimmer: Open=trimmer open, Closed=trimmer closed, Trim=measured at this position.
(4)
Tolerance line and riser is +/-15 [mm]
Total
length
(incl.
Carabiner
or
connect)
Total
length
(no cara-
biner or
con-
nect)
Present inspection’s scope only extends to the conformity of a given sample, on a given date and in a given place – as mentioned here above. The validation of this report is given by the signature of the test manager on inspection certificate 71.8.1
(1)
Total length measured from the underside of the glider to the inner edge of the risers with a tenstion of 50 [N]. Measured values do not include the uncertainty/The uncertainty stated is the expanded uncertainty obtained by multiplying the standard uncertainty
by the coverage factor k = 2. The measured values lies within the assigned range of values with a probability of 95%.
(2)
Manu=Values from manufacturer, Sample=Measured by inspector.
RE | rev 17 | 11.10.2019 Page 1 | 1 ISO | 91.24