DaVinci Point XXS, User Manual

Page: 28 / 37

AIR TURQUOISE SA | Rte du Pré-au-Comte 8 | CH-1844 Villeneuve | +41 (0)21 965 65 65
Test laboratory for paragliders, paraglider harnesses and paraglider reserve parachutes
Line and Riser Measurements of flight test Paraglider
(1)
Report No. : Sample name: Date measure:
Place:
Manufacturer: S/N: Responsible:
Linked:
Total line length including risers [mm] Main brake line with diff color than A,B,C main line? Yes
+strap
Manu
(2)
Sample Diff Manu Sample Diff Manu Sample Diff Manu Sample Diff Manu Sample Diff Manu Sample Diff Manu Sample Diff Sample
Center
1 6507 6497 -10 6453 6448 -5 6511 6512 1 6573 6578 5 5828 5818 -10 6626 6625 -1
2 6467 6457 -11 6404 6398 -6 6426 6426 -1 6487 6492 5 5875 5866 -9 6440 6440 0
3 6520 6512 -8 6448 6440 -8 6441 6441 0 6492 6494 2 6329 6333 4
4 6475 6473 -2 6398 6388 -10 6405 6407 2 6455 6460 5 6288 6293 5
5 6471 6471 0 6389 6380 -9 6426 6430 4 6471 6476 5 6179 6181 2
6 6453 6454 1 6363 6360 -4 6361 6358 -4 6398 6395 -3 6082 6085 3
7 6441 6441 0 6352 6348 -4 6331 6329 -2 6365 6360 -5 6060 6063 3
8 6420 6417 -3 6334 6332 -2 6316 6312 -4 6343 6344 1 6127 6130 3
9 6397 6397 0 6315 6309 -6 6316 6311 -5 6343 6342 -1 5978 5984 6
10 6378 6375 -3 6288 6289 1 6292 6284 -8 6312 6302 -10 5894 5898 4
11 6330 6328 -2 6246 6244 -2 6241 6232 -10 6260 6252 -8 Stab line to riser: 5818 5805 -13
12 6208 6206 -2 6144 6143 -1 6158 6150 -8 6177 6169 -8 B
13 6128 6125 -3 6069 6069 0 6105 6097 -8 6120 6115 -5
Wing
14 5914 5920 6 5948 5938 -10
tip
15 Number Cell: 38
16 Weight of the glider [kg]: 4.04
17
18
Tolerance [mm]
(4)
:
±15
Riser measurement - total length (inner edge) [mm]
(3)
Acc system configuration max travel Test Atmosphere AGL
Risers Std Acc Trim Risers Std Acc No. of risers 3 Pressure [hPa] 965.4
A
533 437 n/a
A
503 407
Tolerance [mm]
5 Humidity [%] 45
A'
531 435 n/a
A'
501 405 Temperature [°C] 22.5
B
522 461 n/a
B
492 431 Carabiner [mm] 30
C
513 513 n/a
C
483 483
Tolerance [mm]
2
D
n/a
D
Plausibility check :
Acc
96 *[mm]
Acc
96 *[mm]
*Travel range (distance [mm] 500
500
Trimmer
n/a [mm]
Trimmer
n/a [mm]
between A and rear riser)
Another trim configuration No
[mm] 10000
10003
If yes (description): Remark:
Instrument validity date
Laser distance meter 07.09.2023 Uncertainty of instrument [mm] 3
Line measurements system 07.09.2023
(3)
Risers, Std=Trim speed, Acc=Accelerated, AND if trimmer: Open=trimmer open, Closed=trimmer closed, Trim=measured at this position.
(4)
Tolerance line and riser is +/-15 [mm]
Total
length
(incl.
Carabiner
or
connect)
Total
length
(no cara-
biner or
con-
nect)
Present inspection’s scope only extends to the conformity of a given sample, on a given date and in a given place – as mentioned here above. The validation of this report is given by the signature of the test manager on inspection certificate 71.8.1
(1)
Total length measured from the underside of the glider to the inner edge of the risers with a tenstion of 50 [N]. Measured values do not include the uncertainty/The uncertainty stated is the expanded uncertainty obtained by multiplying the standard uncertainty
by the coverage factor k = 2. The measured values lies within the assigned range of values with a probability of 95%.
(2)
Manu=Values from manufacturer, Sample=Measured by inspector.
Villeneuve
ISO 91.20
A B C D E Stab Brake
PG_1650.2020
Davinci Point XXS / close trimmer
APT-XXS11028-RBW 19.05.2020
Claude Thurnheer
RE | rev 17 | 11.10.2019 Page 1 | 1 ISO | 91.24