8
Manual
DV‑44
1.5 ADJUSTING THE DV-44 FOR USE
The DV-44 is now ready for use; we only have to
adjust the time.
• Remove the plastic cap of the time switch.
On the right side of the clock you will find a
3-position switch.
1 =
Continue ‘ON’
0 =
Everything ‘OFF’
= The DV-44 switches at the set times.
• Put the 3-position switch on the clock
• Now we have to determine when the DV-44
needs to be switched ‘ON’ and ‘OFF’.
• Therefore, the pins that are around the clock
need to be pushed out.
Are the pins pushed INWARD: The clock will
switch ‘OFF’
Are the pins pushed OUTWARD: The clock will
switch ‘ON’
• To have the timer switch between 2 times (the
‘ON’ time, and the ‘OFF’ time), ALL the pins
between those 2 times need to be pushed out.
• The shortest switch position of the clock is 15
minutes.
• When you have determined the ‘ON’ and
‘OFF’ times, turn the clock slowly (manually)
clockwise to make sure everything is correct.
• If you are sure that everything switches at the
right time, theDV-44 is ready for use.
1.6 FOR YOUR SAFETY
• The correct operation of the DV-44 is only
guaranteed, if you observe this manual.
• Although it is possible to install the DV-44
yourself, we recommend to have this done by
a certified installer.
• Before installing the DV-44, the 230 v. voltage
MUST be taken off the power point (Check
this!)
• This guide is only to be used for the DV-44.
• DAVIN
®
products are covered by a 1-year
warranty.
• To qualify for this warranty, you are required
to return the DV-44 to the point of sale.
• If changes are made to DAVIN
®
products
without the express and written prior
permission of the manufacturer, the warranty
will become void.
• The DAVIN
®
warranty will also become void
with improper installation of the DV-44.
• Neither the manufacturer, nor the importer,
nor the retailers of the DV-44 are liable for
damages arising from the use of the DV-44.
SERVICE NUMBER / HELPDESK:
+31 (0)6 – 14 813 447
DV-44 Binnenwerk PMS.indd 6
13-6-2012 1:06:48
