USER’S MANUAL
MA07-02/B
8
The equipment does a measurement of the resistance of our body through the 4 electrodes. If contact with the
electrodes is not right or the hands are wrongly placed on the sensors, the resistance value will not be correct
which may lead to an inaccurate calculation of the percentage of body fat.
The resistance value must be between 390 and 1200 Ohms.
Measurement
The measurement of body fat index is optional. If the user steps off the platform, the equipment will override the
measurement of body fat index.
IMPORTANT: People with implants, pacemakers or other electronic device for medical use should not use the
measurement of body fat index.
To measure the body fat index, hold the lateral sensors with bare hands, clean and slightly moist, as it appears on
the screen indications.
The display indicates when the measurement is complete and you can take your hands off the sensors.
The equipment takes into account the following user data to output the result values:
o
Age
o
Sex
o
Complexion (optional, depending on configuration)
If not using a smart card, you must enter the data using the computer keypad. Follow the instructions on each
screen to correctly enter each of the requested data.
If you use a smart card, your data should be already stored in the memory of the card, in which case you only shall
be asked to confirm it, using the equipment keypad.
Finally, the display shows the values obtained according to the measurement and data entered by the user.
VALUES OBTAINED
FAT INDEX = 28.2%
FAT MASS = 26.7kg
MASS WITHOUT FAT = 67.1kg
3.5. PRINTED RESULTS
3.5. PRINTED RESULTS
3.5. PRINTED RESULTS
3.5. PRINTED RESULTS
Upon completion of the selected measurements, the equipment automatically prints a receipt with the obtained
results including the recommended values for each measurement performed.
DAVI&CIA
COLLECT YOUR TICKET
