DISTRIBUTOR MANUAL
MA35-51/E
Paper / Lever
This test does a continuous check of the state of the paper sensor and the printer lever.
5.1.10.
Coin test
To verify that the coin checker works, insert a coin and check that the channel number and value of the coin
match the reading on the appliance. Insert more coins to check that the reading of the counter works properly.
5.1.11.
LEDs test
(1)
Press a button to verify that the matching LED lights up.
(2)
Press the same button again to turn it off.
(3)
Press <STOP> to finish
5.1.12.
Power test
This test is used to check that the power outlets work.
(4)
Press the outlet button you want to check
(5)
On the next screen, the appliance will automatically activate the selected item
(6)
Check that it works properly
NOTE: It is possible that not all outlets will be operational.
5.1.13.
Input tests
This test is used to check that the inputs work.
5.1.14.
Pressure cycle test
The appliance will test the pneumatic appliance (compressor, electrovalve, and bracelet), through continuous
cycles of pressure and decompression.
5.1.15.
Battery test
This test automatically checks the battery voltage of the BASE_14.
5.1.16.
ADC test
(1)
To do an automatic test of the Analogic-Digital converters, select ADC AUT
(2)
Press <STOP> to finish.
5.1.17.
Buzzer test
If you press the BUZZER button, the buzzer will automatically buzz.
5.1.18.
Keyboard test
To verify the keaboard works properly, press any key and check that the value appears in the display.
23