DAVI & CIA PS1300S User Manual Download

Page: 13 / 17

USER’S MANUAL

MA18-02/B

6. TROUBLESHOOTING

Error Message

Reason

Action

Low Battery: This warning shows
that the voltage of battery is too
low to use

Please replace a new battery or plug the AC
adaptor for operation

Overload: The total load exceeds
the maximum capacity of the scale

Please reduce the loading and try again

Counting error (too high): Indicates
that the signal from the load cell is
too high

This error is normally caused by a serious fault on
the scales such as faulty load cell or wiring. Please
contact the local service representative.

Counting error (too low): Indicates
that the signal from the load cell is
too low

This error is normally caused by a serious fault on
the scales such as faulty load cell or wiring. Please
contact the local service representative.

Zero count over calibration zero
range +10% while power on

Please recalibrate the instrument

Zero count under calibration zero
range -10% while power on

Please recalibrate the instrument

EEPROM Error: Indicates that
there is a fault with the scale’s
software

This error is normally caused by a serious fault on
the scales such as faulty load cell or wiring. Please
contact the local service representative.

Summary of Contents for PS1300S


















Search results

Summary of Contents for PS1300S

Reviews:

Related manuals for PS1300S

Brands by name

Popular brands

DAVI & CIA PS1300S, User Manual

Search results

Summary of Contents for PS1300S

Reviews:

Related manuals for PS1300S

Brands by name

Popular brands