3
Congratulations on your purchase of a high quality, New Zealand made Steriflo
®
Ultra Violet water treatment system. All components have been designed and
manufactured to give trouble free, reliable operation.
Your new Steriflo
®
system incorporates a lamp failure system design feature that
enables you to be warned of a lamp failure by :-
1. A lamp failure LED
2. An audible alarm
3. Remote alarm contacts
In addition when the alarm “beeps” on and off, the lamp is due to be changed so
that effective treatment is maintained.
Preparing your system
On removing your Steriflo
®
system from its carton you should check all
components, especially the lamp, to ensure all are present and have not been
damaged in transportation. You should have:
1. Power supply control box with indicator light(s) and electrical flex.
2. UV lamp (or lamps).
3. Treatment chamber with mounting brackets.
Before installing your new Steriflo
®
, please read all instructions carefully as failures
caused by incorrect installation or operation are not covered by the guarantee. Your
Ultra Violet water treatment system is designed to handle clean water. The system
should not be used for any other purpose without specific referral to CCL. The use of
the system with flammable, corrosive and other materials of a hazardous nature is
specifically excluded.
Lamp
Quartz Sleeve (pre-installed in chamber)
Drain plug
Lamp Lead
1 metre
OUTLET
or
INLET
INLET
or
OUTLET
Treatment Chamber
Power Lead
1.5 metre
Alarm LED (Red)
Alarm reset
On LED (Amber)
The appliance is not intended
for use by young children or
infirm persons without
supervision. Young children
should be supervised to ensure
they do not play with the
appliance
NOTE: The quartz sleeve has been
factory fitted, and there is no need to
remove these endcaps on first
installation. Before removing endcaps,
please read the Maintenance section of
these instructions completely.
