9
IMPORTANT:
• If you are in doubt about any aspect
of your RainBank kit’s suitability,
check with your Davey Dealer. For
help in locating your closet Dealer
call the appropriate Davey Customer
Service Centre listed on the back of
this booklet.
• RainBank is designed to handle
clean rainwater and mains water.
It should not be used to interconnect
as part of a bore water, dam water,
grey water, stormwater or recycled
water system without appropriate
additional backflow.
• Make sure the wiring, plumbing and
the RainBank unit are protected
from access by children and pets.
Other things we recommend to
maximise the performance and
serviceability of your RainBank.
• Fit a first flush system to the guttering
if possible to divert the initial run of
water from the roof that may contain
dirt and pollutants.
• Fit a strainer to the top of your tank
inlet to stop leaves entering the
system.
• Fit a 1 inch ‘Y’ strainer with 200
micron mesh to the pipe work
between the pump and RainBank.
This will ensure that debris from
the tank will not build up inside
RainBank, washing
machines or toilet cisterns.
• Use at least 20mm or ¾ inch
plumbing to and from RainBank to
reduce the effect of pipe friction.
Galvanised pipe not recommended.
!
BEFORE YOU START
Summary of Contents for RainBank KRBS1
Page 34: ...34 Notes...
