7
IMPORTANT
Because it involves mains water,
RainBank may only be legally
installed by a licensed plumber.
Ensure mains water pressure is
limited to 600kPa.
NOTE: Because the effects of seasonal
change etc. can cause the
pump and tank to move slightly
relevant to the home it is highly
recommended that discharge
and/or suction pipe lines be fitted
with flexible pipe, such as braided
hose, reinforced suction hose or
polythene pipe.
Different types of RainBank
Installations
There are different ways a RainBank can
be installed depending on your rainwater
tank and pump configuration.
INSTALLATION TYPE 1 - PAGE 16
Tank:
above ground
Pump:
outside tank
Float switch:
must be installed inside
of tank
Pump Kit:
KRB1, 2, 3 & 4
INSTALLATION TYPE 2 - PAGE 21
Tank:
above ground
Pump:
submersible inside tank
Float switch:
incorporated with pump
Pump Kit:
KRBS1 & 2
INSTALLATION TYPE 3 - PAGE 22
Tank:
below ground
Pump:
submersible inside tank
Float switch:
incorporated with pumps
Pump Kit:
KRBS1 & 2
Mains In
To House
Mains In
To House
FS
HOW TO INSTALL RAINBANK
!
Mains In
To House
Summary of Contents for RainBank KRBS1
Page 34: ...34 Notes...
