8
Weather Protection
It is recommended that the pump is protected from the weather. Enclosures
should be ventilated to prevent condensation build-up.
Wiring Connection
Please refer to the below schematic for information on how to correctly install
your pump.
Pipe Connection
Barrel unions are provided for connecting to the piping from the pool. The
pumps are designed to accept 40mm/50mm PVC fittings.
When plumbing the discharge pipe, ensure that the pipework does not
interfere with the pumps speed dial.
The use of any pipe smaller than those specified above is not recommended.
Suction piping should be free from all air leaks and any humps and hollows
which cause suction difficulties.
The discharge piping from the pump outlet should be connected to the inlet
connection on the swimming pool filter (usually at the filter control valve).
Barrel unions need to be hand tightened. No sealant, glues or
silicones are required.
Summary of Contents for ProMaster PM400BT
Page 21: ......
Page 26: ...NOTES...