25
Water Quality
Maintaining balanced water chemistry is important to the life of your pool pump.
This pump is designed to be used with Pool & Spa water, balanced in
accordance with Langelier Saturation Index, with a pH level of between 7.2 and
7.6 and is regularly treated with a chlorine sanitising agent with the level not
exceeding 3.0 ppm.
Please consult your local pool shop regularly to have your water tested.
POWER CONNECTIONS AND WIRING MUST BE CARRIED OUT BY
AN AUTHORISED ELECTRICIAN.
DANGER - Hazardous suction. Do not block water entry into
filtration system with any part of your body as the pressure can
trap hair or body parts, causing severe injury or death. Do not block
suction. Turn off pump immediately if someone becomes trapped.
Caution! Do not add chemicals directly to the pool skimmer. Adding
undiluted chemicals may damage pump and filter and void warranty.
Routine Maintenance tasks - to maximise the life of your pool equipment
& personal safety, use this checklist once a week. Turn pump off first.
a. Make sure that any pressure gauges are in working condition and the
operating pressure is within limits as specified on the product.
b. Make sure that each suction inlet, and main drain has a cover that is
securely attached and in safe working condition.
c. Make sure that all skimmer covers are securely attached and in safe
working condition. These should be replaced every 3 to 4 years.
d. Remove any obstructions or debris from the main drain cover.
e. Ensure the skimmer baskets and the pump hair and lint pots are free
of leaves and debris at least once a week.
f. Remove obstructions and combustibles from around the pump motor.
g. Make sure all wiring connections are clean and that all wiring and
electrical equipment is in good condition. Damaged wiring must be
repaired or replaced by a qualified electrician as soon as damage is
discovered.
h. Check water balance and sanitiser levels at your local pool shop.
WARNING! Pump suction is hazardous and can trap and drown or
disembowel bathers. Do not block suction. Do not use or operate
swimming pools, spas or spa baths if a suction cover is broken,
missing or loose. Two suction covers and inlets must be provided
into every pump to avoid suction entrapment.
Summary of Contents for ProMaster PM400BT
Page 21: ......
Page 26: ...NOTES...