13
MCXS Controllers
MCXS
Series
A full colour LCD screen provides the user with a detailed description
of the system’s performance in addition to providing any applicable
fault messages and system diagnostics. All controllers include an
“infinite expandability port” located on the right side of the controller.
Simply plug in a UV sensor module into the expandability port of a
controller for the system to monitor the UV intensity of the system.
MCXS
Power-up Sequence
On start up, the controller will run through a diagnostic start-up and the sequence will
be displayed as follows on the colour LCD:
Next, the controller checks for and initialises any optional modules that may be
attached to the system.
Optional
Modules Check
• UV Sensor*
• Solenoid
• 4-20 mA
• Remote Alarm
• Flow Meter
OR
A final module screen is displayed showing which specific modules that were initialised.
The controller then displays the lamp optimisation screen for 60 seconds to allow
the lamp to reach its optimum output. Finally, a final “start-up complete” screen is
displayed. The system will now be ready to disinfect water flow.
all detected modules
lamp reaching max output
successful start-up
*
Included with UV30-CA / UV68-CA systems.
