Exterior Bracket Light
7680
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU BEGIN INSTALLING YOUR LIGHT
230V ac 50Hz
Installation Diagram
IP54
A classic, continental style well glass fitting light with screw glass. This wall or pendant light has a
clean design and suits both traditional and modern locations. Crafted out of galvanised iron or raw
sand blasted bronze, the light has a heavy cast construction. The wall light is available with a
standard right angle arm or in the classic French canted version. Mounted either on a round base
dome cover or on a corner fork.
DP7680 Exterior Bracket Light
DP7680 Exterior Bracket Light Canted Arm Version
Contents
1 - Backplate/Arm/Pan assembly
2 - Reflector
3 - Narrow Gasket
4 - Well Glass*
5 - 4 x Fixing screws
6 - 4 x Rawl plugs
7 - Connector
8 - Corner Fork
Required for Installation
-
Screwdriver, flat-head
- Small screwdriver, flat-head
- Drill (if holes are required)
Installation and Assembly Instructions
1
2
3
4
Install light as described overleaf.
Assemble the rest of the light, following the diagram on the opposite page.
- Having inserted a light bulb, ensure gasket is in place around neck of glass and screw
into the pan through the opening in the reflector. Do not overtighten.
If the light is to be installed in an exterior location, it is advised that a thin bead of sealant is applied around the
back plate to prevent water damage.
*Glass screws into pan, supporting
reflector. Unscrew well glass
when re-lamping.
8
Optional Extras
5
6
A Fixing Screw
B Connector Block
C Main Supply
Key
E27
GLS
BALL
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
60W MAX
15W
28W
12W
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
A
B
C
7
