manualshive.com logo in svg

Dave Smith Instruments Prophet Rev2, User Manual

Share
Download
Dave Smith Instruments Prophet Rev2 User Manual Download Page 6

Effects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Effects Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Arpeggiator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Arpeggiator Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Clock Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Sequencer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Programming the Polyphonic Sequencer . . . . . . . . . . . . . . . . . . . . . 43
Editing a Polyphonic Sequence  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Copying a Polyphonic Sequence Between Layers . . . . . . . . . . . . . . 45
Programming the Gated Sequencer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Using Slew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Sequencer Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Clock Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Unison  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Using Chord Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Master Volume/Program Volume . . . . . . . . . . . . . . . . . . . . . . . .54

Pan Spread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Transpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Glide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Pitch and Mod Wheels  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Pitch Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Modulation Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Adding Aftertouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Exporting Programs and Banks . . . . . . . . . . . . . . . . . . . . . . . . .64

Importing Programs and Banks . . . . . . . . . . . . . . . . . . . . . . . . .65

Summary of Contents for Prophet Rev2











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands