Dave Smith Instruments Prophet Rev2, User Manual

Page: 46 / 106

36 Effects Dave Smith Instruments
• Flanger 1 - vintage through-zero flanger, high feedback
• Flanger 2 - vintage through-zero flanger, no feedback
• Reverb - classic digital reverb with adjustable size and color
• Ring Mod - emulation of Tom Oberheim’s classic ring modulator
• Distortion - digital distortion (analog emulation)
• HP Filter - high-pass filter.
For best performance,run the flangers and high-pass filter 100% wet. (i.e. set
the
mix
parameter to 127).
To use Effects:
1. Press the
on
/
off
switch to turn on effects.
2. Turn the
select
knob to choose an effect, depending on which you want
to apply and configure.
3. Turn the
mix
knob to blend in a good amount of the processed signal.
You’ll want to be able to clearly hear the effect when you tweak its settings.
You can dial it down afterward.
4. Use the
param
1 and
param
2 knobs to adjust the effect’s parameters
to your taste. See “Effects Parameters” on page 36 for details on the
adjustable parameters on each effect type.
5. Finally, adjust the
mix
knob again to optimize the amount of the effect.
Full left is completely dry. Full right is completely wet (a 100%
processed signal).
Effects Parameters
On/Off:
Turns the effect on or off. On stacked or split sounds, enable the
edit layer b
button to affect Layer B.
Select:
Selects the effect type.
Mix: 0...127
—Sets the balance between the processed (wet) signal
and unprocessed (dry) signal. Full left is completely dry. Full right is
completely wet.