Dave Smith Instruments Prophet Rev2, Manual

Page: 38 / 202

15 Prophet Rev2 User’s Guide Global Settings
7. MIDI Param Receive: Off, CC, NRPN—
Sets the method by which
parameter changes are received via MIDI. As with transmission, NRPNs
are the preferred method.
8. MIDI Control Enable: Off, On—
When On, the synth will respond to
MIDI controllers, including Pitch Wheel, Mod Wheel, Pedal, Breath,
Volume, and Expression.
9. MIDI Program Enable: Off, On—
When On, the synth will respond
to received MIDI Program Change and other SysEx messages, and will
transmit them (when prompted) to the MIDI Out. See
Sysex Messages on
page 90 for details.
10. MIDI Sysex Cable: None, MIDI Port, USB—
Sets the port, MIDI or
USB, by which System Exclusive data will be transmitted and received.
11. MIDI Out Select: Off, MIDI, USB, MIDI+USB—
Sets the port by which
MIDI data will be transmitted.
12. Multi Mode: On, Off—
Multi Mode allows separate MIDI control of
voices 1-8 and voices 9-16 on 16-voice systems. (On 8-voice systems
this is voices 1-4 and voices 5-8.) This enables independent, bi-timbral
control of the Prophet Rev2.
When Multi Mode is on, the Prophet Rev2 responds to MIDI data on two
consecutive MIDI channels — the base channel (selected in the Global
menu) and the next highest channel. The base channel controls voices 1-8
(or 1-4 on 8-voice systems) and the other channel controls voices 9-16
(or 5-8 on 8-voice systems). Notes, program changes, and other MIDI
GDWDUHFHLYHGRQWKHVSHFL¿HGFKDQQHOVSURYLGHLQGHSHQGHQWFRQWURORI
the two parts.
Note that a program change needs to be sent to each of the two chan-
nels when setting up Multi Mode. Only Layer A of the selected program
is loaded. There are no stacks or splits in Multi Mode. Use CCs or
Layer A NRPNs for automation of parameters. Program Layer B data is
completely ignored in Multi Mode