9
Prophet Rev2 User’s Guide
Getting Started
Split Programs
In split mode, playing a key on the left side of the keyboard will play the
Layer A sound and playing a key on the right side will play the Layer B
sound. Polyphony is allocated equally between the two sounds, with half
of the available voices on Layer A and half on Layer B.
7KHVSHFL¿FNH\WKDWVWDUWVWKH/D\HU%VRXQGLVFDOOHGWKH
split point
,
and is saved with the program.
All factory programs have a “B” layer, even if that layer isn’t currently enabled.
To turn Split on:
• If it’s not currently lit, press the
split
a
|
b
button. The button becomes
lit. The left side of the keyboard plays the Layer A sound and the right
side of the keyboard plays the Layer B sound.
To turn Split off:
• If it’s currently lit, press the
split
a
|
b
button. The button becomes unlit.
Only the program on Layer A is heard across the full range of the
keyboard.
To set the split point:
1. Make sure the
split
a
|
b
button is lit.
2. Press and hold the
split
a
|
b
button and press a key on the keyboard.
This sets the start point for Layer B.
3. Release the
split
a
|
b
button.
To swap Layer A and Layer B sounds:
1. Press both the
split
a
|
b
button and the
stack
a
+
b
button simultaneously.
2. Turn the
parameter
knob and select
swap
a
and
b
.
3. Press the
write
button. Layer A and B are swapped.
Summary of Contents for Prophet Rev2
