Dave Smith Instruments Prophet Rev2, Manual

Page: 132 / 202

62 Adding Aftertouch Dave Smith Instruments
Pan Mod Mode: Alternate,Fixed—
Designates the behavior of panning
when Pan is used as a modulation destination. Choosing
alternate
directs modulation to the Pan Spread parameter, and thereby affects the
panning width of individual voices within a program. Choosing
fixed
directs modulation to panning for the entire program.(In this case you
should set Pan Spread to zero.) For example, if you choose Mod Wheel
as a source and Pan as a destination in the mod matrix with an Amount
setting of 127, pushing the Mod Wheel to its full (top) position will pan
the sound hard right. An Amount of -127 will pan the sound hard left
when you push the Mod Wheel to its top position.
Glide Mode: Fixed Rate,Fixed Rate A,Fixed Time, Fixed Time A—
Sets
the way the oscillators respond to Glide settings. See “Glide” on page
page 56 for more details.
Osc 1 Glide: 1...127—
While the glide
rate
knobs sets the same amount
of glide for both oscillators simultaneously, you can use the
osc glide
1
parameter to set an individual glide amount for Oscillator 1.
Osc 2 Glide: 1...127—
While the glide
rate
knobs sets the same amount
of glide for both oscillators simultaneously, you can use the
osc glide
2
parameter to set an individual glide amount for Oscillator 2.
Pitchbend Range: 1...12—
Sets the bend range, in semitones, of the
pitch wheel. The setting is the range in the positive or negative direction.
)RUH[DPSOHDVHWWLQJRIOHWV\RXEHQGDQRWHXSRUGRZQE\D¿IWK
Unison Mode: 1...16, Chord—
Sets the number of voices stacked
when
unison
is enabled. Choosing
chord
, enables chord memory. See
“Unison” on page 51 for more details.
Unison Detune: 0…16—
When
unison
is enabled,
unison detune
allows
you to detune the unison voices by a variable amount.