Dave Smith Instruments Pro 2, Operation Manual

Page: 65 / 152

55 Pro 2 Operation Manual Sequencer
To add ties to an existing sequence using the sequence editor:
1. Hold down the
track Select
button and press the step LED with the
same number as the track you want to edit. Release the
track Select
button.
2. Press and continue to hold the LED button for the step where the tie
will start.
3. Turn soft knob 4 (
tie
) and keep rotating to set the length (in steps) of
the tie.
4. To add ties to other portions of the sequence, Toggle the desired step
LED off and on, then turn soft knob 4 (
tie
) to set the length of the tie.
5. Repeat steps 2-4 as desired.
6. To listen to the sequence, make sure the
Sequencer
button is on, then
press
play
/
Stop
.
Notes
Slew
Velocity
Note: C5 Slew:0 Tie Velo:100
C
5
* * *
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
steps 1-4
are tied